Reducing Regulators

EDS In-Line Low Pressure Regulator

 
 

REG-1048-05The EDS In-line regulator is for applications in which you may wish to operate your EDS O2D1 or O2D2 units from an oxygen source other than our regulators such as an oxygen source of 30 to 90 psig.

 

 

Many of the built-in oxygen systems found in most type-certified aircraft operate from 30 to 80 psig. Some have been measured providing up to 110 psig. This is usually a sign that repair or replacement is necessary

The EDS In-Line regulator can operate up to four (4) O2D1 units or two (2) O2D2 units. The EDS In-Line regulator kit can be optionally ordered with one of the three most common OEM-type BNC-Connectors found in most aircraft of the time (shown in photo) for direct "Plug-n-Fly" for your aircraft type.

 

You can have it your way. Just talk to us during your order, because the inlet and outlet ports of this high quality In-line stabilizing regulator are configurable for almost any type of built-in oxygen system.  (STR-CFI Kit Shown)

 

 

 


 

 Inline OH-F

 


 

 

STRABCD

  

MH Item A: BNC-PB-566
Fits most Cessna single engine prior to 1980.
Fits most Cessna twin engine prior to 1970.

MH Item B: BNC-SCOTT
BNC-SC01-100 connector fits most Beechcraft, Mooney and Piper with built-in oxygen systems.

MH Item C: (CPC) type oxygen connector.
Connector fits most late model Cirrus, Cessna Corvallis, Columbia's  with built-in oxygen systems.

MH Item D: BNC-PB-750
Fits most late model Cessna singles 1980 on.
Fits most late model Cessna twins 1970 on.
Also fits Piper Matrix.

  


 

(A)
Description:
In-Line stabilizing regulator with PB566 style Oxygen connector
Fits most Cessna single engine prior to 1980.
Fits most Cessna twin engine prior to 1970.
MH Item #: 00REG-1048-03

SET-C flow 

Product
00REG-1048-03
EDS-STR-566
Price/Unit
275.00 USD
Qty

  


(B)
Description: In-Line stabilizing regulator with Scott type oxygen connector
BNC-SC01-100 connector fits most Beechcraft, Mooney and Piper with built-in oxygen systems.
MH Item #: 00REG-1048-01


SET-B Flow

Product
00REG-1048-01
EDS-STR-Scott
Price/Unit
250.00 USD
Qty

 

  
(C)
Description: In-Line stabilizing regulator with XCP (CPC) type oxygen connector
Connector fits most late model Cirrus, Cessna Corvallis, Columbia's  with built-in oxygen systems.
MH Item #: 00REG-1048-04
 
Set-A-Flow
 
Product
00REG-1048-04
EDS-STR-CPC
Price/Unit
225.00 USD
Qty
  
 

(D)
Description:
In-Line stabilizing regulator with BP750 type oxygen connector
Fits most late model Cessna singles 1980 on.
Fits most late model Cessna twins 1970 on.
Also fits Piper Matrix.
MH Item #: 00REG-1048-02


SET-D Flow

 

Product
00REG-1048-02
EDS-STR-750
Price/Unit
255.00 USD
Qty

 

  

Description: EDS In-line stabilizing Regulator only, with a 6 mm. OD on the inlet and a 6mm. OD on the outlet.
Note: If using your own connector make sure there is no restrictor installed.


MH Item #: 00REG-1048-00
Less inlet connector
Price

 

Product
00REG-1048-00
EDS-Stabilizer-regulator-Kit
Price/Unit
200.00 USD
Qty

 


  

Description: (STR-CFI Kit Shown) In-Line stabilizing regulator with All above oxygen connectors.
MH Item #: 00REG-1048-05


REG-1048-05

Product
00REG-1048-05
EDS-STR-Scott/750/566/CPC
Price/Unit
395.00 USD
Qty

 

Attachments:
FileDescriptionFile size
Download this file (REG-1048 (5IREG-1110-00).PDF)Reg-1048 (5IREG-1110-00)12/24/2013287 Kb
Download this file (Regulator Step-Down Info.pdf)Regulator(1048), Inline Step-Down Info12/06/2013351 Kb