You asked for it and we made it. Many of our Fixed Base Operators(FBO) have requested a complete oxygen filling system with regulator.
Well here it is. We have put together a complete system with everything you need.
We start with the regulator.
This High Pressure Oxygen Regulator is the best we could find.
The standard kit comes with a non-venting style regulator.
A vented style regulator is available upon request at no extra charge.
*See below for explanations of regulator types.
Together with that we have combined our time proven components.
Each FBO kit comes with the four most common fill adapters that you will need.
Combine that with a hose length of your choice and you are in business.
Many of our customers have asked to take the bulk away from the aircraft or fill end.
We have moved the bleed valve up near the regulator so now the supply end has far less weight.
However, we can configure your system with the bleed valve at the fill end if you prefer.
We have also gone to a smaller diameter braided hose to reduce weight and facilitate ease of handling.
Our system also incorporates a flow restrictor to prevent filling too fast, as well as built-in filters.
All Components are cleaned and ready for Oxygen use.
For use with CGA-540 Oxygen fitting. (DIN fitting available on request)
FBO KIt includes
High Pressure Oxygen Regulator with Gauges and Adapters. (Less Hose)
Hose sold seperatly. See below
FBO Kit Item Number ( 00GSE-1050-00 )
FBO Kit Item Number ( 00GSE-1050-08 ) w/ 8 ft. Hose
Regulator Assy with Gauges and Valve only (00GSE-1047-00) (No hose or adapters)
Manufacture certs are available on request.
**What is the difference between a vented and non-vented regulator?
When the pressure downstream of a vented regulator exceeds the set pressure by some amount (this varies based on the regulator) that excess pressure is vented out the regulator to atmosphere. A non-vented regulator will not vent excess pressure downstream of the regulator.
The kit includes these 4 fill adapters, which can be ordered separately.
AN 800 (3/8-24) fill adapter. ( 00GSE-1039-00 ) Fits AKA MS22066 & 22035 Fill Port.
AN/800 Nut-Driver Wrench ( 00GSE-1098-00 ) for 00GSE-1039-00
Medical style (CGA-870) fill adapter. ( 00GSE1045-00 )
CGA540 fill adapter or (DIN 477) on request. ( 00GSE-1046-00 )
Scott Style (9/16-18) fill adapter ( 00GSE-1043-02 ) AKA Airline or AS1064 & AS1219 Fill port.
Add Hose length of your choice.
Custom Lengths available on request.
Click on Picture Below for information on Manifolding or Cascading fill Tanks.