Mountain High has redesigned their Boom Cannula system to make it even better. The redesigned nylon boom arm affixes to your headset with a ball mount and adhesive pad. It can swivel about and slides in and out for best fit. The new improved arm incorporates an adjustable friction lock to eliminate slippage. The nasal tips and the entire feed-tube assembly are easily replaceable, as well as the aluminum mount ball. The arm can be easily removed from the headset when not in use.
The E-Z Breath Boom Cannula II™ has been tested for best use with all of our EDS and XCP products.
The E-Z Breath Boom Cannula II™ boom cannula kit from Mountain High has all the items needed to install onto almost any headset in use today.
Description:E-Z Breathe kit for MH-EDS and MH-2ip &MH-4ip Systems.
MH Item #: 00EDS-1092-00
Description: E-Z Breathe kit for MH-2ip and 4ip Built-in systems (Old Style).
MH Item #: 00EDS-1092-01
Description: E-Z Breathe kit for MH-XCP and other constant flow systems.
Note: This is not a conserving devise. When using with constant flow systems, facemask settings must be used.
MH Item #: 00XCP-1092-00
Description: E-Z Breathe Quick Disconnect.
This connector allows the disconnect of the feed tube while leaving the Boom arm in place on the headset.
MH Item #: 19053-0009-00
1) Description: E-Z Breath-II Cannula Boom.
MH Item #: 00VEN-0071-00
2) Description: Standoff, Square.
MH Item #: 09052-0802-04
3) Description: Spacer, Round.
MH Item #: 09054-0803-09
4) Description: Thumb Screw, Shoulder, Knurled Head.
MH Item #: 09120-0812-05
5) Description: Replacement Tips.
MH Item #: 00VEN-0074-01
8) Description: MH Universal Aluminum Ball Mount.
(Will not fit Oxyarm Aviator)
MH Item #: 00VEN-0072-01
9) Description: Adhesive Dot to attach Easy-Breath ball to Headset.MH Item #: 00VEN-0073-02