Remote Fill Ports/Manifolds
Remote Fill Stations
Remote Fill Stations
We have a complete line of remote Oxygen Fill-Stations, hardware and fittings to allow you to design and install your Oxygen System
with the most exacting specifications and requirements.
Fill Port, Ck Valve
Fill Port, Check valve
Our MS22066 (AN800 3/8 -24) style fitting that mates to a 1/8 NPT-F port.
Has Schaider type check valve. Includes cap and chain.
This part is not certified.
MH Item #: 00BLT-1008-00
Our MS22066 (AN800 3/8 -24) style fitting that mates to a SEA-4 7/16-20 port.
Has internal poppet type check valve. Includes cap and chain.
This part is not certified.
MH Item #: 00BLT-1010-00
Scott Type (9/16-18) Poppet style fill adaptor with SAE-4 (7/16-20) Thread.
MH Item #: 00BLT-1012-00
Low Profile Manifold
MH Low Profile -High Pressure pick off manifolds. Can be Cylinder or Bulk-Head mounted.
The Low-Profile manifolding system provides you with the ability to remotely mount your regulator from the cylinder. This is ideal where the cylinder may need to be mounted in a tight area where the regulator assembly would be too hard to reach of not fit. Additionally, this gives you the ability to cascade cylinders in your custom built-in system.
Manifolds include:
(1) 1/8" Compression Fitting.
(1) 3/16" Compression fitting.
(1) Burst Plug.
(1) Aux. Port Plug.
(1) Dip Tube. (This may be removed for Bulkhead mounting.)
High Pressure Manifolds
Tee Manifold for High Pressure use.
Item Number: 00MAN-0006-00
2X2X2 SAE Tee High Pres.(alum)
Item Number: 00MAN-0008-00
2X2X4 SAE Tee High Pres.(alum)
Item Number: 00MAN-0010-00
4X4X2 SAE Tee High Pres.(alum)
Item Number: 00MAN-0012-00
4X4X4 SAE Tee High Pres.(alum)